RM 8 I KNX

AED 0

Technical data

Operating voltage KNX	Bus voltage, ≤4 mA
Operating voltage	110 V AC – 240 V AC, 50 Hz – 60 Hz
Frequency	50 – 60 Hz
Stand-by consumption	~2.4 W
Installation type	DIN rail
Width	8 modules
Type of connection	Terminal screws \| Bus connection: KNX bus terminal
Max. cable cross section	Solid wire: 0.5 mm² (Ø 0.8) to 6 mm² \| Stranded wire with end sleeve: 0.5 mm² to 4 mm²
Number of channels	8
Type of contact	NO contact, 16 A, 10 A
Opening width	< 3 mm
Resistive load	3680 W
Capacitive load	200 µF
Incandescent/halogen lamp load	2600 W
Fluorescent lamp load (conventional) parallel-corrected	2000 W (200 µF)
Fluorescent lamp load (electronic ballast)	1650 W
Energy saving lamps	410 W
LED lamp < 2 W	75 W
LED lamp 2-8 W	850 W
LED lamp > 8 W	850 W
Inrush current	max. 1500 A / 200 µs
Voltage output	240 V AC
Switching output	Potential-free
Switching of various phases	Possible
Suitable for SELV	Yes if all channels switch at SELV
Accuracy current measurement	I > 1 A: ± 8 % of measured value; I < 1 A: ± 100 mA; lowest measurable value: 150 mA
C load
Type	Module FIX2
Ambient temperature	-5°C ... 45°C
Type of protection	IP 20
Protection class	II according to EN 60 669

Hand book	ZIP	KNX_HB_RMG_4_I_MIX2 (2,0 MB)
Operating instructions	PDF	RM 8 I (1,6 MB)
KNX-Database (Single Product)	ZIP	RM 8 I KNX (525,5 kB)
CAD symbol	ZIP	4940215 (1,6 MB)
CAD symbol	ZIP	RM 8 I KNX (1,6 MB)
Data sheet	PDF	RM 8 I KNX (505,4 kB)
Brochure	PDF	KNX home and building control brochure (5,9 MB)
Catalogue	PDF	General catalogue 2022 (35,1 MB)

Product variants

Need help?

Pairs well with

RM 8 I KNX

AED 0